Last Updated： Aggregation Period:Jul 15, 2026～Aug 11, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 15, 2026～Aug 11, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 15, 2026～Aug 11, 2026
This ranking is based on the number of page views on our site.
1～30 item / All 34 items
Heat recovery type, low running cost, paint drying oven.
The world's only hot air drying furnace, Drytec, is well-known in the painting industry. Its excellent finish, rapid temperature rise, good temperature distribution, and low fuel consumption make it a bestseller worldwide. Additionally, it is a dryer that pursues quality and cost-effectiveness, suitable for installation in clean rooms.
The performance of the blower has become more powerful, and the diameters of the outlet and inlet have been standardized, making the piping work easier.
■Equipped with an inverter ●The hot air dryer is equipped with a blower that allows for hot air circulation, which can significantly reduce power consumption when utilizing hot air circulation.
Noise level measurement method...
In the general office, the hot air outlet of the hot air generator was connected to the drying box using a one-way flow, and the average value was recorded from measurements taken at four locations, 1.5 meters away from the hot air generator. The remote controller and remote operation switch will be included in the composite photo. Warranty period: 3 years. The casters on the model equipped with casters are for easy movement to the installation site, so please be sure to use the adjusters for installation after setting it up.
Simple low-cost dehumidifier using compressed air.
The "CA Series" dehumidifying hot air dryer is a simple and low-cost dehumidifying dryer that uses compressed air. It is used for drying pellet materials. High moisture-absorbing materials require appropriate drying processes. By optimally managing temperature, time, and airflow, it removes internal moisture without damaging the materials and prevents poor drying of items like silver. 【Features】 ○ Performs simple dehumidifying drying using compressed air available in the factory (setting conditions for compressed air is necessary) ○ To enhance drying capacity, a dedicated dehumidifying air generation device can be installed ○ Can be easily installed directly onto molding machines or placed on the floor For more details, please contact us or download the catalog.
Numerous achievements in dehumidification and drying! Energy-efficient and compact dehumidifying hot air dryer.
The "MJ3 (Multi Jet)" is a floor-mounted device that combines a dehumidifying hot air dryer and a suction transport system into a single platform, providing stable low dew point dry air at -40°C, with a focus on maintainability. The adoption of a double hopper improves thermal insulation and contributes to energy savings. The honeycomb adsorption tower eliminates the need for adsorbent replacement, maintaining initial performance continuously. Additionally, the integration of dehumidification, drying, and transport, along with a redesign, has achieved significant compactness. 【Features】 ■ Reliability ■ Energy efficiency ■ Compactness ■ Maintainability ■ Safety
The shelves are pull-out style for easy access. Temperature settings can also be adjusted for each shelf.
The multi-tier shelf hot air dryer is a space-saving dryer capable of drying large quantities of products on each shelf.
Hot air drying combined with vibration transport! A dryer that allows continuous discharge while drying!
The "Urel Dryer (VCD type)" is a dryer that combines hot air drying and vibration transport. It allows for continuous discharge while drying. It can also be used as a cooling device by converting hot air into cold air. By using steam as the heat source, it is possible to achieve energy savings. The vibrating conveyor only vibrates the trough, resulting in minimal vibration transmission to the surrounding area. 【Features】 ■ Continuous discharge while drying ■ Can be used as a cooling device by converting hot air into cold air ■ Energy-saving options available by using steam as the heat source ■ Suppresses vibration transmission to the surroundings *For more details, please refer to the catalog. Feel free to contact us with any inquiries.
Fully compatible with a wide variety of food drying! Achieves astonishing low power consumption performance by recovering and reusing 80-90% of exhaust heat.
Japan's traditional food culture "kanbutsu," with its diverse range of food drying, is fully supported by Takubo's unique system. The heat recovery type hot air dryer TD-500 series is equipped with a patented high-efficiency heat exchanger, which recovers and reuses 80-90% of exhaust heat, achieving an astonishingly low power consumption performance (30% reduction compared to Takubo Seiki Seisakusho). 【Features】 ■ Only exhaust heat is recovered and returned to the chamber along with clean air. ■ The built-in heater performs only the minimum necessary heating. ■ Contributes to CO2 reduction with astonishing power consumption savings. ■ Available in an all-stainless steel type (TD-500S) and an economical painted steel type (TD-500F). ■ Consistent in-house production until final assembly. *For more details, please contact us or refer to the catalog.
Special order production! Energy-saving hot air dryer with rollers, usable up to 300℃.
At Chowa Industrial Co., Ltd., we accept orders for the special production of various products. The "Roller-Type Hot Air Dryer" is an energy-saving hot air dryer that can be specially ordered. It has rollers inside the chamber, allowing samples to be inserted along with the cart. It can be used at temperatures up to 300°C, and manual damper intake and exhaust are possible. We can accommodate various specifications tailored to your needs, including detailed requests regarding dimensions. 【Features】 ■ Samples can be inserted along with the cart ■ Supports temperatures up to 300°C ■ Manual damper intake and exhaust available *For more details, please refer to the PDF document or feel free to contact us.
A compact hot air dryer that combines the functions and performance of a large machine.
"Digi-Cure+" is a solution device designed for small to medium-sized production processes. It is compact in size but includes all the functions of a large dryer, allowing for use in a similar manner. It features an exhaust fan inside the chamber, creating a cleaner working environment. Additionally, the adoption of a sophisticated digital interface allows for easy control of belt speed and chamber temperature. 【Features】 ■ Space-saving design with a 0 cm wide conveyor belt ■ High drying capacity with a chamber length of 2.6 m ■ Control via a touch screen ■ Provides a clean working environment with a built-in exhaust fan ■ Equipped with twin fans, offering double the airflow of conventional models ■ Improved maintenance with tool-free detachable panels ■ Easy cleaning with an oil drip tray attached to the exhaust outlet *For more details, please refer to the PDF document or feel free to contact us.
![Instant drying in a short distance! Non-ventilated heat treatment [drying] device "Heat Blow"](https://image.mono.ipros.com/public/product/image/6a3/2000548378/IPROS11168145456268717319.png?w=280&h=280)
High-temperature treatment (up to 230°C) is possible with gas combustion! Eliminates the need for conventional insulation boards, making maintenance easy. We will bring your ideas and product development to life!
The "Heat Blow" is a heat treatment (drying) device with independent hot air blowing and recovery systems on both the upper and lower sides. Despite being very compact (short distance), it enables highly efficient drying and heat treatment. Due to the independent hot air blowing (ejection) and recovery method (newly devised/patented) on both sides, it is capable of drying and heat treating non-ventilated substrates, allowing for individual heating of each side, and enabling one-sided drying or thermal lamination of the heated surface. Furthermore, it maintains "bulk" and has a good texture. 【Features】 ■ Capable of high-temperature processing (up to 230°C) using gas combustion ■ The unit structure equipped with hot air generators and circulation blowers allows for easy expansion and modification of heating conditions for each unit ■ Eliminates the need for conventional casings (insulation panels) ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.
The superiority of Drytech.
[Item] [Features of Dry Tech] [Comparison with Other Companies' Dryers] 1. Diversity of Heat Source Methods: Can be designed according to needs with gas, electric, infrared, far infrared, hot air circulation, etc. Other companies often have limited heat source options. 2. Uniform Drying Performance: Achieves even drying throughout the workpiece through unique airflow and temperature control. Some dryers may cause uneven drying depending on the workpiece area. 3. Energy-saving Design: Reduces energy loss through heat recovery systems and insulation design. Older models may have high energy consumption. 4. Safety: Reduces the risk of fire and explosion through indirect heating methods and exhaust monitoring sensors. Direct flame methods may still pose fire risks. 5. Integration with Coating Systems: Designed to work in conjunction with painting robots (Swan robots) and transport lines. Standalone equipment may require additional investment for automation. 6. Customizability: Fully custom designs possible based on work size, paint characteristics, and production volume, including electric furnaces and firing kilns. There may be cases where only standard specifications can be selected. 7. After-Support: Comprehensive domestic support system by Takubo Engineering. Maintenance response may be delayed for overseas products.
A hot air dryer that can handle products that are considered difficult to dry, such as soft plastics, thanks to the effects of hot air and agitation!
Introducing the DJ-1500 model hot air dryer from Nippon Seam Co., Ltd. 【Features of the DJ-1500 Hot Air Dryer】 ○ The rotation of the rotor located in the center performs a stirring action, and by allowing the product to float in a high-temperature chamber, the drying effect is enhanced. ○ The tank chamber is divided into three sections, and products are transported by a large screw equipped at the rear of the rotary, enabling continuous drying. ○ Deaeration is necessary for drying all types of products, and it can be easily achieved through the processes of hot air, air transport, and cyclone. *For more details, please download the catalog or contact us directly.
Best-selling model with excellent drying capability and energy efficiency.
The "LUXOR Series" dehumidifying hot air dryer is a system that ventilates and dries using stable low dew point dehumidified air as a raw material. Typically, most drying systems generate dehumidified air through regeneration → heating → cooling, but the closed-loop method does not use outside air for cooling during the adsorbent regeneration process, preventing re-adsorption of moisture and maximizing the effectiveness of the adsorbent. Additionally, the cost of replacing the desiccant during maintenance is about half that of honeycomb rotor types. 【Features】 ○ Drying with stable low dew point air ○ Revolutionary energy-saving system ETA process (world patent) ○ Central system that significantly reduces equipment costs and improves productivity For more details, please contact us or download the catalog.
A structure with enhanced safety measures! A hot air dryer suitable for drying products even at relatively high temperatures.
The "NDA-40" is a hot air dryer that performs drying in a short period using a hot air method that enhances thermal efficiency. The hot air temperature is variable up to 120°C at the discharge temperature. It is suitable for drying products that can withstand relatively high temperatures. It has a structure with enhanced safety measures. 【Features】 ■ Performs drying in a short period using a hot air method that enhances thermal efficiency ■ Suitable for drying products that can withstand relatively high temperatures ■ Structure with enhanced safety measures ■ Takes into account the type of liquid, product shape, safety, etc. ■ Provides effective clean drying in a short time *For more details, please refer to the PDF materials or feel free to contact us.
Hot air drying device
The hot air drying device is a system that evaporates the solvent from the ink by blowing hot air onto the substrate through a nozzle, thereby fixing the solid components of the ink onto the substrate. It has excellent drying capabilities and can dry continuously at high speed and uniformly. Based on our track record of adoption in dryers for gravure printing machines, coaters, and laminators, we will continue to develop and supply products that consider all aspects, including high efficiency, energy saving, easy maintenance, and support for the environment.
It has excellent drying capabilities and can continuously dry at high speed and uniformly.
The hot air drying device is a system that evaporates the solvent from the ink by blowing hot air onto the substrate through a nozzle, thereby fixing the solid components of the ink onto the substrate. It has excellent drying capabilities and can continuously dry at high speed and uniformly. At Heat Technology Development Co., Ltd., based on our track record of adoption in dryers for gravure printing machines, coaters, and laminators, we will continue to develop and supply products that consider all aspects, including high efficiency, energy saving, easy maintenance, and support for the environment. 【Product Lineup】 ○ Slit Nozzle ○ Floating Nozzle ○ Perforated Plate Nozzle For more details, please contact us or download the catalog.
We offer a variety of nozzle shapes that can be selected according to your needs!
The hot air drying device is a system that blows hot air from nozzles onto a substrate to evaporate the solvent in the ink and fix the solid components to the substrate. It has excellent drying capabilities and can continuously dry at high speed and uniformly. Our drying device is designed based on unique drying simulations and fluid analysis, and we offer a variety of nozzle shapes to ensure appropriate selection according to the application. 【Features】 ■ Excellent drying capability ■ Capable of continuous, high-speed, and uniform drying ■ Nozzles can be selected according to the application ■ Equipped with a clean room for dryer assembly *For more details, please refer to the catalog or feel free to contact us.
A hot air dryer that achieves top-class space-saving in the industry.
The design minimizes dead space on the back and is compact, including the connecting transport hose, making it one of the best in the industry. By combining an intuitive color touch panel with a seat switch that is resistant to repeated use, we have achieved both operability and durability. By adding options, it can also be used as a dehumidifying dryer that maintains drying performance even in high-humidity environments.
The medium in a fluidized state is continuously supplied with slurry and dried by hot air. The solid particles dispersed in the slurry are extracted at the size of primary particles.
This is a dryer that continuously dries slurry and extracts solid components dispersed in the slurry at the size of primary particles. The slurry is directly supplied to a fluidized medium in the drying tower using a pump, where it is in a fluidized state due to hot air. The supplied slurry adheres to the surface of the medium in a film-like manner while being dispersed and dried within the fluidized bed. The evaporated substances in the slurry are dried in a short time, and the solid components remaining on the surface of the medium are continuously peeled off due to contact between the media and are discharged from the fluidized tower along with exhaust, where they are collected as dried powder using a cyclone, bag filter, etc.
Efficient drying by controlling hot air! Ideal for drying materials containing flammable solvents!
This is a device that efficiently dries by controlling hot air. It can be designed and manufactured not only for standard circulation types but also for pass-through types suitable for drying materials containing flammable solvents. 【Features】 ■ The drying chamber is made entirely of stainless steel, making it hygienic and easy to clean. ■ A cart-type design is available, allowing for easy movement even with a large number of trays. ■ The circulation fan or exhaust fan can be adjusted for airflow with inverter control. ■ In the event of a trouble occurrence, the "self-diagnosis function" guides you through the recovery operation on the maintenance screen. ■ An easy-to-read and user-friendly touch panel enables fully automatic operation until drying is complete. *For more details, please contact us or download the catalog to view.
A device capable of floating transport and roll transport with stable temperature control and wind speed control!
The "hot air drying device, hot air dryer" is a drying device for optical and functional films, as well as metal foils, capable of floating and roll conveyance. It features custom design that supports stable temperature control and airspeed control, suitable for both development and mass production equipment. 【Features】 ■ Uniformity of temperature and precision of roll bearings ■ Custom design that accommodates both development and mass production equipment *For more details, please refer to the PDF document or feel free to contact us.
High-precision humidity management is possible! For drying insulators and ceramic filters, etc.
The "Hot Air Dryer" is a device that can dry various ceramic products such as insulators and ceramic filters while managing humidity with high precision. [Features] ■ High-precision humidity management ■ Compatible with various ceramic products *For more details, please refer to the catalog or feel free to contact us.
Reliable drying color! A compact hot air dryer with a simple structure and no failures.
The "Paint Dryer CG-350" is a compact hot air dryer that can be used anywhere there is a household power supply, allowing for easy forced drying of paint boards. It demonstrates remarkable power in speeding up color mixing tasks and streamlining painting operations. The drying time for paint boards varies depending on the type of paint, but generally ranges from 2 to 15 minutes, providing stable drying results. 【Features】 ■ Fast drying time, no foaming ■ Uniform drying ■ Reliable drying color ■ Ready to use immediately after switching on ■ Stable temperature and airflow *For more details, please refer to the PDF document or feel free to contact us.
Challenge, Trust, and Hope for the Next Generation all begin at the Research Lab!
The "Research Lab" was established with the goal of "providing products that satisfy our customers" and conducts daily research and development to ensure that customers can confidently purchase our products. First, we install small testing machines to gather basic data and understand various principles. After that, we equip practical-sized testing machines to apply the foundational data in a practical manner. In this way, we conduct thorough analyses from both foundational and practical perspectives, allowing us to provide products that meet our customers' expectations. 【Features】 ■ Thorough analysis from foundational and practical perspectives ■ Development based on reliable data backing ■ Actively involved as the core of product development ■ A commitment to allowing customers to directly see research results, deepening our bond with customers by listening to their opinions at all times *For more details, please refer to the related link page or feel free to contact us.
Easy maintenance, space-saving design! Ensures uniform drying of substrates running at high speed.
The "Floating Dryer" is a non-contact dryer designed for space-saving, which blows hot air from nozzles onto water-soluble substrates (paper, film, metal) coated by a coating machine while running at high speeds, drying the solution and fixing the solid content to the substrate. It is capable of continuously and uniformly drying large amounts of water-soluble substrates running at high speeds. Additionally, it can maintain stable operation even at low tension, making it suitable for elastic films and paper substrates. 【Features】 - No rollers or similar components are used, resulting in good maintenance and equipment stability. - High efficiency and energy-saving design reduce running costs. - The substrate is stably supported by the hot air blown from each nozzle, allowing for compact installation at various angles. *For more details, please refer to the PDF document or feel free to contact us.
A hot air dryer with cooling intake and exhaust that can be custom-made to your specifications!
At Chowa Industrial Co., Ltd., we accept orders for the special production of various products. The "Cooling Air Intake and Exhaust Hot Air Dryer" is a hot air dryer that employs a cooling air intake and exhaust structure to apply stress to the samples. By not only cooling with a cooler but also introducing outside air, it can rapidly lower the temperature from high temperatures to room temperature. We can also manufacture to the requested dimensions and specifications that can accommodate the desired temperature. 【Features】 ■ Adoption of cooling air intake and exhaust structure ■ Rapidly lowers temperature from high to room temperature with cooler cooling and outside air introduction *For more details, please refer to the PDF materials or feel free to contact us.
Capable of handling temperatures up to 700℃! A compact hot air dryer that allows for programmed temperature cycles.
At Chōwa Kōgyō Co., Ltd., we accept orders for the special production of various products. The "High-Temperature Hot Air Dryer" is a compact high-temperature dryer capable of handling temperatures up to 700°C. It allows for programmed temperature cycles. We also accept orders for production in dimensions tailored to specifications. 【Features】 ■ Compact and high-temperature drying ■ Capable of handling up to 700°C ■ Programmable temperature cycles available *For more details, please refer to the PDF document or feel free to contact us.
With a two-stage belt, achieve the work of two machines with one!
The "DUAL smart" is an advanced two-stage belt conveyor dryer that can accommodate various applications, not limited to screen printing or digital printing. The dryer is available in four different belt widths and five different furnace lengths, allowing for customization to meet the specific drying conditions of each customer. By modularizing individual components, it is also possible to add drying furnaces in line with business growth. 【Features】 ■ Provides a clean working environment with exhaust systems located at the entrance and exit of the furnace ■ Easy maintenance with detachable panels, drawer-type filters, and drip trays at the exhaust outlets ■ Equipped with automatic tension adjustment and wandering correction rollers ■ Structure designed to minimize heat on the outer walls of the casing with an air curtain system using triple insulation ■ Models with belt widths of 150cm and 180cm can choose a split belt option ■ Features an automatic belt speed control system that adjusts the belt speed simply by inputting the drying time *For more details, please refer to the PDF document or feel free to contact us.
